Model and serial identification
Record the pump, cylinder, jack or accessory model so parts and manuals can be matched without guessing.
This page supports Power Team engineering review. The goal is to help buyers evaluate pressure, flow, tonnage, stroke, hose length, valve function and service documentation before a hydraulic tool is placed into a maintenance plan.
Hydraulic selection is sometimes oversimplified into maximum pressure. Power Team treats pressure as only one variable. A useful recommendation also considers oil volume, duty cycle, power source, return method, coupler style, gauge placement and the safety margin created by the fixture or cribbing arrangement.
The table format keeps the review dense and practical. Use it to prepare a request for a pump, jack, cylinder, torque wrench pump or repair part recommendation.
| Checkpoint | What Power Team reviews | Why it changes selection |
|---|---|---|
| Pressure range | Target working pressure, relief setting and gauge readability | Prevents selecting a pump that reaches pressure but gives poor control near load movement. |
| Oil volume | Cylinder bore, stroke, number of cylinders and hose length | Determines whether the pump reservoir and flow rate can finish the cycle without delay. |
| Circuit type | Single-acting or double-acting cylinder behavior and valve requirement | Aligns the pump and valve with advance, hold and retract expectations. |
| Power source | Electric supply, compressed air, manual operation or mobile field limits | Balances speed, portability, hazardous-area constraints and available infrastructure. |
| Load geometry | Side load risk, cribbing plan, fixture contact and clearance envelope | Protects cylinder life and improves the quality of the lifting, pressing or pulling procedure. |
| Service path | Seal kits, couplers, hoses, gauges, oil condition and documentation | Keeps maintenance costs visible after the first purchase decision. |
Power Team inquiries are easier to resolve when basic records travel with the equipment. These records are not decorative badges; they are the practical information a maintenance team needs when a pump, cylinder or jack comes back from a job.
Record the pump, cylinder, jack or accessory model so parts and manuals can be matched without guessing.
Keep recent test pressure, gauge condition and observed drift information for troubleshooting.
Document connection style, rated pressure and inspection dates across the hydraulic set.
Track oil changes, water intrusion, metal debris and symptoms that may point to valve or seal wear.
Store the recurring job condition, tonnage estimate and cribbing plan near the tool record.
List common seals, gauges, fittings and hoses so downtime is not extended by basic identification work.
Send the load, stroke, cycle count, available power source and current tool models. Power Team will help organize the next technical conversation.